Adeegyada iyo Qaybaha Loogu Talagalay Qaybaha CNC ee Gaarka ah - OEM China CNC Qaybaha Loogu Talagalay Soo-saare iyo Shirkad
Dulqaadka CNC ee Junying
Waxaan leenahay awoodo badan oo wax soo saar CNC ah waxaana dabooli karnaa baahiyo kala duwan.
1. Cabbirka
| Cabbirka toosan | +/- 0.025mm +/- 0.001 inji |
|---|---|
| Dhexroorka godka (aan dib loo habayn) | +/- 0.025mm +/- 0.001 inji |
| Dhexroorka usha | +/- 0.025mm +/- 0.001 inji |
| Xadka Qaybta Cabbirka | 950 * 550 * 480mm 37.0 * 21.5 * 18.5 inji |
2. Heerarka Mashiinka CNC
| Heerarka Mashiinka CNC (DIN ISO 2768-1(1991-06) | ||||||||||||||
| Fasalka dulqaadka | dulqaad (mm) | |||||||||||||
| Bir (ISO 2768-F) | Balaastig (ISO 2768-F) | |||||||||||||
| 0.5 ilaa 3 | In ka badan 3 ilaa 6 | In ka badan 6 ilaa 30 | In ka badan 30 ilaa 120 | In ka badan 120 ilaa 400 | In ka badan 400 ilaa 1000 | In ka badan 1000 ilaa 2000 | 0.5 ilaa 3 | In ka badan 3 ilaa 6 | In ka badan 6 ilaa 30 | In ka badan 30 ilaa 120 | In ka badan 120 ilaa 400 | In ka badan 400 ilaa 1000 | In ka badan 1000 ilaa 2000 | |
| F | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 |
2.1 Dulqaadka Guud ee Qaabka iyo Booska
| Dulqaadka guud ee qaabka iyo booska (DIN ISO 2768-2(1991-04) | |||||||||||||||
| Fasalka dulqaadka | dulqaad (mm) | ||||||||||||||
| Toosnaanta iyo Fidsanaanta | Qaab-dhismeedka toosan | Isku-dheelitir | |||||||||||||
| 10 | 10 ilaa 30 | 30 ilaa 100 | 100 ilaa 300 | 300 ilaa 1000 | 1000 ilaa 3000 | ilaa 100 | 100 ilaa 300 | 300 ilaa 1000 | 1000 ilaa 3000 | ilaa 100 | 100 ilaa 300 | 300 ilaa 1000 | 1000 ilaa 3000 | ||
| H | ±0.02 | ±0.05 | ±0.1 | ±0.2 | ±0.3 | ±0.4 | ±0.2 | ±0.3 | ±0.4 | ±0.5 | ±0.5 | ||||
| Alaab | Noocyada iyo Darajooyinka la heli karo |
| Aluminium | Aluminium 2024 Aluminium 5052 Aluminium 5083 Aluminium 6063 Aluminium 6061 Aluminium 6082 Aluminium 7050 Aluminium 7075 |
| Naxaas/Naxaas | Naxaas C360 Naxaas 260 Naxaas C932 M07 oo sita |
| Naxaas | Naxaas C110 Naxaas 101 |
| Bir | Birta Daawaha 4130 Birta Daawaha 4140 Bir khafiif ah 1018 Bir khafiif ah A36 |
| Bir aan Daxal lahayn | Bir aan Daxal lahayn 17-4 Bir aan Daxal lahayn 18-8 Bir aan Daxal lahayn 303 Bir aan Daxal lahayn 304/304L Bir aan Daxal Lahayn 316/316L Bir aan Daxal lahayn 416 Bir aan Daxal lahayn 420 |
| Titanium | Fasalka Titanium 2 Fasalka Titanium 5 |
| Balaastikada | ABS Nayloon ARAG EEG PMMA PTFE Polystyrene Polyethylene Polycarbonate |
| Sida loo farsameeyo mashiinka | Sharaxaad |
| Sida loo farsameeyo mashiinka | Dhammaystirka caadiga ah oo leh qallafsanaan dusha sare ah oo ah 1.6 μm (126 μin). |
| Simitaan | Heerka caadiga ah ee simanaanta dusha sare (Ra) waa 0.8 μm (63 μin). |
| Rinjiyeynta | Ku buufinta rinjiga, midabka, ama midabka dusha adag si loo noqdo lakab ilaalin midab leh. |
| Kalsooni darro | Ka saar wasakhda birta ah ama isticmaal dahaar khafiif ah oo ah walxo ilaalin ah si aad u abuurto qolof. |
| Dahaarka Budada | Dhammaystir shaqeynaya oo qurxin ah oo loo adeegsado sidii budo qalalan oo xor ah oo socota. |
| Anodizing | Nooca II (midab-diid ama cad) ama Nooca III (dabo adag oo-diid ah) |
| Nadiifinta | Soo saar dusha siman oo dhalaalaya. |
| Oksaydh Madow | Samaynta dahaar madow oo lagu beddelo qaybaha birta. |
| Qaraxyada kuul | Ka saarista meelaha dusha sare ku jira adigoo ku dhejinaya kuul galaas ah cadaadis sare. |
| Qarax/Bambo-sameyn Ba'an | Simida iyo nadiifinta dusha adag iyadoo lagu qasbayo walxaha adag inay dul maraan dusha sare. |
| Elektroplating/Dahaadhka | Samee dahaadh bir ah oo khafiif ah oo isku xidhan oo ku yaal elektroodh. |
| Cadayashada | Birta oo lagu dhalaaliyo ciid taasoo keenta dhammaystir satin ah oo hal dhinac ah. |
| Dahaarka Beddelka Chromate | Kordhi iska caabbinta daxalka iyadoo la ilaalinayo sifooyinka gudbiyaha. |
Haddii aad u baahan tahay agab aan caadi ahayn iyo daaweyn dusha sare ah oo gaar ah, fadlan nala soo xiriir.
1. Qaybtaydu ma ku habboon tahay CNC Turning?
2. Sidee loo dhimaa Qiimaha Qaybaha Makiinadaha?
Kharashaadka ugu muhiimsan ee la xiriira mashiinka CNC waxaa loo qaybin karaa waqtiga mashiinka, kharashka bilowga, kharashka agabka, iyo kharashka sifooyinka. Si loo yareeyo kharashyada, waxaad u baahan tahay inaad fahamto saameynta arrimahan ku leeyihiin kharashyada.
- Habka ugu wanaagsan ee lagu dhimi karo waqtiga farsamaynta waa in la naqshadeeyo sifooyin si dhakhso ah loo farsamayn karo, sida iyadoo la dooranayo gacanka geeska gudaha ee saxda ah, yareynta qoto dheer ee godka, kordhinta dhumucda derbiga, xaddididda dhererka dunta, iyo naqshadeynta godadka cabbirka caadiga ah.
- Qiimaha agabka waa la dhimi karaa iyadoo la tixgelinayo cabbirka meesha bannaan ee loo baahan yahay iyo kharashka iyo farsamaynta agabka badan (daawaha jilicsan ayaa si dhakhso leh u shaqeeya).
- Kharashyada bilowga ah waxaa lagu dhimi karaa iyadoo la dhimayo tirada wareegyada qaybaha ama dib-u-habaynta loo baahan yahay si loo dhammaystiro qaybta, sida qaybinta joomatari ee qaybo badan oo la isku dari karo hadhow.
- Isticmaalka dulqaadka oo keliya marka si adag loo baahdo, tirtiridda dhammaan qoraallada iyo xarfaha, iyo ka fogaanshaha daawaynta dusha sare ee badan waxay yareyn kartaa kharashyada muuqaalka.
Faahfaahin dheeraad ah ka akhri hagahayaga oo dhammaystiran oo ku saabsan sida loo dhimo kharashka qaybaha mashiinka CNC.
3. Qaybaha noocee ah ayaa lagu samayn karaa CNC Turning?
4. Waa maxay Xarunta Wareegga CNC - Farqiga u dhexeeya Lathes-ka CNC iyo Xarumaha Wareegga CNC
5. Daaweynta Kulaylka ee Qaybaha Saxnaanta La Soo Jeediyay
6. Waa maxay Farqiga u dhexeeya CNC Turning iyo Milling?
Aan ka wada hadalno mashruucaaga. Dib u eegista DMF, fadlan halkan guji.
Ku raaxayso keenistayada degdega ah iyo tan bilaashka ah
warshadaha caafimaadka
Warshadaha Gawaarida
Warshadaha badda
Warshadaha Beeraha
Warshadaha qalabka mashiinka
Warshadaha militariga
Warshadaha tignoolajiyada sare
Warshadaha cuntada
Warshadaha Hawada Sare
Warshadaha Semiconductor-ka
Haddii aad raadineyso qaybaha leexinta CNC ee u baahan mashiin sax ah sida xarunta leexinta ama dukaan mashiinnada CNC ah oo ii dhow, Junying waxay ku siin kartaa adeegyada ugu fiican ee mashiinnada leexinta CNC.
Junying waxay hubin doontaa tayada qaybaha mashiinka iyada oo loo marayo xalal badan
Waxaan samayn doonnaa kormeer tayo leh dalab kasta, warbixinno dheeraad ah iyo shahaadooyin ayaa lagu bixin karaa codsigaaga. Fadlan soo gudbi dalabka si aad u bilowdo.
- Cabbirrada Muhiimka ah
- Tirada qaybaha
- Ka saarista geesaha fiiqan iyo burrs
- Tirada qaybaha la baaray
- Dhammaadka dusha sare
- Warbixinta kormeerka cabbir buuxa
- Warbixinta tijaabada walxaha/warshadda
- Shahaadooyinka ISO9001, ISO14001, ISO27001 iyo IATF 16949
- Kormeerka maqaalka koowaad ee dalabaadka 100+ cutub
- Shahaadada U hoggaansanaanta
- Warbixinnada Tijaabada Agabka
Awoodda ugu badan ee CNC ee loo rogo Junying
| Xadka Cabbirka | Metrik | Imperial |
| Dhexroorka ugu badan ee qaybta | 431mm | 17 inji |
| Dhererka ugu badan ee qaybta | 990mm | 39 inji |
| Lugeyn ugu badan oo gaadhiga lagu qaado | 350mm | 13.7 inji |
| ugu badnaan daloolka dhex mara godka | 40mm | 1.5 inji |
Waa maxay CNC leexinta iyo sida ay u shaqeyso - Aasaaska Habka leexinta CNC
Hawlgallada Wareejinta CNC - Noocyada Wareejinta CNC
Junying waxay hubin doontaa tayada xigashada qaybaha la rogay. Xigashooyinka CNC-ga ayaa isla markiiba la soo saari karaa.
Kiiskeena iyo alaabada:
